TYPE

LINE CIRCUIT
- Pull/pull line circuit to tiller or wheel.
- Many circuit options, consult manual.

DIMENSIONS
- Request dimensions or scale drawing
from SAILOMAT Design Office.
- SAILOMAT 601-S series: short shaft
- SAILOMAT 601-X series: long shaft

SERVO BLADE
- SAILOMAT 601-S series blade lengths:
B = 920, 1020, 1220 mm
- SAILOMAT 601-X series blade lengths:
B = 1020, 1220, 1350, 1500 mm

MATERIALS
- Light alloy (marine grade) castings,
- aluminum extrusions, (high yield strength 28 kp/mm2, 40,000 psi),
- advanced composite bearings,
- 316 ss fasteners, Helicoil thread inserts.

PENDULUM
- Swing ability 140/170 deg, out of water
= overload safety.
- 'Parking' in upright position ( 170 deg).

BASE
- 170 x 305 mm (6.7"x 12.0") compact 'footprint'.

WEIGHTS
- SAILOMAT 601-S series: from 24 kg (53 lbs)
- SAILOMAT 601-X series: from 26 kg (58 lbs)

MAIN SHAFT
- Very high strength, OD/ID: 60/48 mm (2.36"/1.89")
- Wall 6 mm

OFF-CENTER MOUNTING
- Permitted. (Select slightly longer blade).

WHEEL COUPLING
- Use optional wheel coupling for wheel-steered yacht.

ATTACHMENT
- Simple. Universal Base UNB. (Zero torque on base).
- Only 4 bolts. High mounting - near deck level.

TRANSOM ANGLES
- Universal Base UNB can be directly mounted to a wide
range of transom angles. Base UNBDE for canoe sterns.

REMOVAL
- Instant removal of system from UNB.

VARIABLE RATIO
- Yes, 6 positions (vane-to-oar), for enhanced downwind
sensitivity & performance.

COURSE CONTROL
- Standard: rotate (turret) vane base casting on mast
tube. Control handle/locking device.

REMOTE CONTROL
- Optional, mechanical (RCC)

VARIABLE RATIO
- Yes, 6 positions (vane-to-oar), for enhanced downwind
sensitivity & performance.

ELECTRIC INSULATION
- Servo blade, shafts and pendulum components are electrically
insulated, minimizing galvanic corrosion.

OVERLOAD PROTECTION
- Built-in, by non-restricted pendulum swing (out of water).

IMPACT PROTECTION
Yes, Shear pin in blade holding fork.

FOR TEXT ONLY VERSION